SolarLink FiberGuard Logistics Campus

Posted by Philip su on

SolarLink FiberGuard off-grid solar PoE security network with Layer 3 telecom-grade fiber aggregation switch

Project name: SolarLink FiberGuard Logistics Campus

Conceptual application design — final quantities, power sizing, fiber routes and installation details require site-specific engineering.

Large logistics campuses, warehouses, parking areas and remote industrial properties often need cameras where utility power and copper Ethernet are impractical. SolarLink FiberGuard combines off-grid solar PoE field stations, a fiber-optic backbone and centralized fiber aggregation in the office control room.

How the system works

Each remote field station supplies local cameras from a solar array, charge controller, battery bank and DC PoE switch. Fiber carries network traffic back to the office control room without long outdoor copper runs. In the control room, the UltraPoE NET-4828-24GF-4T Layer 3 managed, telecom-grade fiber aggregation switch aggregates the field links and provides high-capacity uplinks to recording, monitoring and core-network equipment.

NET-4828-24GF-4T Layer 3 telecom-grade fiber aggregation

  • Layer 3 managed switching for telecom, industrial and control-room networks
  • 24 Gigabit SFP interfaces, including eight shared RJ45/SFP combo positions
  • Four 10 Gigabit SFP+ uplinks
  • RIP and DHCP support
  • 128 Gbps switching capacity and an 8K MAC address table
  • 1U rack-mount construction for office or control-room deployment

Why fiber is the right backbone

Fiber supports long-distance transmission, provides high bandwidth for multiple camera streams and avoids copper Ethernet distance limits. It also helps isolate remote equipment from electrical differences between buildings and field locations. Final fiber type, optics and link budget must be selected for the actual distance, connector type and environment.

Off-grid solar design know-how

A reliable solar PoE station starts with an energy budget—not only panel wattage. Calculate the continuous load of cameras, the local PoE switch and supporting electronics, then account for conversion losses, peak-sun hours, seasonal weather, temperature and required battery backup.

  1. Add the continuous wattage of every powered device.
  2. Multiply by 24 hours to obtain daily watt-hours.
  3. Add engineering margin for losses, startup current and future devices.
  4. Size the battery for the desired autonomy and allowable depth of discharge.
  5. Size the solar array for the worst practical seasonal conditions.
  6. Verify the PoE budget, optics, surge protection and enclosure thermal design.

Recommended applications

This architecture suits distribution centers, trailer yards, parking facilities, construction sites, solar farms, utilities and remote industrial campuses. UltraPoE supports integrators from City of Industry, California, for deployments across California, Texas, Arizona and the United States.

Frequently asked questions

Is this an installed customer project?

No. It is a conceptual application design showing how the products can be combined. Final camera count, power sizing, fiber routing and installation details require site-specific engineering.

Why use fiber instead of long copper Ethernet?

Fiber supports much longer links, higher aggregate bandwidth and electrical isolation between remote locations.

What does the NET-4828-24GF-4T do in the control room?

It serves as a Layer 3 managed, telecom-grade aggregation core, combining Gigabit fiber links from remote field stations and providing four 10G SFP+ uplinks for the core network, servers or recording infrastructure.

Does the NET-4828-24GF-4T provide PoE power?

No. It is a Layer 3 managed fiber aggregation switch. Local PoE switches at the field stations power the cameras.

Can field stations operate entirely from DC power?

Yes, when properly engineered. A compatible DC architecture can reduce conversion losses, but voltage, battery, PoE switch and camera requirements must be verified together.

How is solar capacity selected?

Solar capacity depends on continuous load, peak-sun hours, weather margin, battery autonomy, temperature and system losses.

Can this design be used in Texas or Arizona?

Yes, but high ambient temperature, enclosure cooling, battery derating and solar exposure must be included in the design.

Build your long-range fiber security network

UltraPoE can help integrators and wholesale customers select the Layer 3 aggregation switch, optics, field PoE switches and outdoor enclosure components. Review the NET-4828-24GF-4T or contact UltraPoE for project support.

Apply for UltraPoE Wholesale Pricing


Share this post



← Older Post